The End Of Line unit is used as an End Of Line termination in audio systems that use a High Frequency (around 23kHz) pilot tone to detect open and short conditions. The termination is placed at the farthest end of the loudspeaker circuit. Unlike most loudspeakers, the EOL box is reactive above 20kHz, so the resulting current can be measured using an AXYS Industry Amplifier. The measured current will change if the circuit is opened or shorted. The EOL box presents either a 75Ω or 150Ω load at 23kHz. This method requires the 23kHz pilot tone to be mixed with the audio. The pilot tone can be generated within the Industry Amplifier family of amplifiers. A failure can be seen and logged using the WinControl Server and mapped to the fault relay on the Industry Amplifier.